CONSOLIDATION HEORY OF UNSATURATED SOIL BASED ON THE THEORY OF MIXTURE(Ⅰ)

Unsaturated soil is a three-phase media and is composed of soil grain,water andgas.In this paper,the consolidation problem of unsaturated soil is investigated basedon the theory of mixture.A theoretical formula of effective stress on anisotropicporous media and unsaturated soil is derived.The principle of effective stress and theprinciple of Curie symmetry are taken as two fundamental constitutive principles ofunsaturated soil.A mathematical model of consolidation of unsaturated soil isproposed,which consists of25 partial differenfial equations with25 unknowns.Withthe help of increament linearizing method,the model is reduced to5 governingequations with5 unknowns,i.e.,the three displacement components of solid phase,thepore water pressure and the pore gas pressure.7 material parameters are involved inthe model and all of them can be measured using soil tests.It is convenient to use themodel to engineering practice.The well known Biot’s theory is a special case of themodel.     

高分子材料湿度含量对其力学性能的影响的实验研究

本文从实验的角度对湿度因素影响下的高分子聚合物材料的力学性能进行了研究。选用了尼龙6材料进行了一系列的有关湿度实验，通过不同含湿率下与时间相关的材料性能实验首次从实验上证明高分子聚合物材料存在湿度-时间等效性。即对材料力学性能而言延长作用时间与增加材料含湿率与等效的，并且具体给出了尼龙6材料的湿度-时间等效关系。如该材料在不同含湿率下的广义曲线，本文工作为进一步研究湿度因素影响下的材料性能提供了实验依据。     

薄板弯曲问题的P型杂交解析有限元方法

本文采用两套变量构造有限元试函数空间，在单元内部要求试函数精确满足平衡微分方程，在单元边界上对位移和转角分别用Ｐｅａｎｏ升阶函数插值，然后利用广义变分原理建立了一种薄板弯曲问题的Ｐ型杂交解析有限方法，与常规有限元法相比，该方法不心进行过细的网格剖分，通过增加单元插值多项式的阶数Ｐ来提高精度，此外，该方法还具有积分计算只需在单元边界上进行、单元钢度矩阵和载荷向量具有嵌入结构、协调程度可以自动控制等优     

缺口疲劳门槛值的实验研究

本文报告了对常用高强材料３０ＣｒＭｎＳｉＡ的双边Ｖ型缺口疲劳门槛值进行的实验测量。通过测试结果分析，证实了对不同缺口半径的试样（△Ｋ１／√Ｐ）ｔｈ基本一致的结论。     

大挠度弯曲直梁混合变量最小势能原理的应用

应用大挠度弯曲直梁混合变量最小势能原理,求解均载两端固定大挠度柱面弯曲板条的轴向挠度分布和轴向弯矩分布．实例计算表明:该方法简单实用、精度高,是一种计算大挠度柱面弯曲板条变形的有效方法．     

On numerical solution of dynamic problems in the theory of reinforced shells

Dynamic problems for cylindrical shells reinforced with discrete ribs are examined. A numerical algorithm based on Richardson extrapolation is developed. Specific problems are solved, and the results are analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 5, pp. 50–56, May 2006.     

Optimal Transitions of a Spacecraft with an Energy Storage and a Low-Power Thruster

A solution is found to the problem on optimal transitions of a spacecraft with a low-power thruster and an energy storage between two close noncoplanar circular orbits. The maximum payload is chosen to be the optimality criterion. The optimal time-dependences of controls and optimal relationships among the mass parameters of the propulsion system are presented. Ranges of these parameters are found within which an energy storage would be appropriate for use. The results are compared with those for a constant-power thruster. The effect of the radial increment and the increment in the orbit inclination angle on the efficiency of the energy storage is studied     

粘弹性随机分析的虚功原理及随机有限元

利用增量法处理粘弹性本构关系中的遗传积分，将粘弹性材料的随机性、结构几何形状的随机性、外载荷的随机性引入虚功方程，应用摄动方法，研究了粘弹性随机分析的虚功原理和粘弹性随机有限元。研究发现，尽管粘弹性本构关系具有时间相依性，其随机摄动格式并不存在“长期项”的影响，算例表明，应用该方法进行粘弹性结构的随机模拟，计算效率较高、精度较高。     

硅微陀螺梳齿驱动的面内失准分析

静电梳齿微驱动器因其结构简单、功耗低、灵敏度高、受温度影响小，成为硅微陀螺仪的主要驱动方式。静电梳齿微驱动器通常由活动梳齿和固定梳齿组成。理想情况下，活动梳齿平行地位于两固定梳齿中心位置。但由于加工误差、驱动结构不对称、扰动等因素，使得活动梳齿相对固定梳齿发生偏转。该文应用能量法及虚功原理，建立了梳齿之间的力与力矩平衡方程。得出了非理想情况下，偏离距离和转角的解析表达式，并分析得出了梳齿间的临界电压。经过数值仿真发现，梳齿面内既偏转又转动时的临界电压小于只发生偏转或转动时的临界电压。     

Equations of motion for mechanical systems: A unified approach

This paper presents a unified framework from which emerge the Lagrange equations, the Gibbs-Appell Equations and the Generalized Inverse Equations for describing the motion of constrained mechanical systems. The unified approach extends the applicability of the first two approaches to systems where the constraints are non-linear functions of the generalized velocities and are not necessarily independent. Furthermore, the approach leads to the Explicit Gibbs-Appell Equations.